Etere - Black LED Bollard with White Diffuser 4000K

The Etere has a simple cylindrical profile suited to contemporary outdoor spaces. Its body is made from cast aluminium with a black powder-coated finish, while the upper section uses an opal-coloured plastic diffuser. The contrast between the dark lower body and pale diffuser gives the bollard a restrained, modern appearance without decorative detailing.

At 60.5 cm high and 12 cm in diameter, the fitting is tall enough to provide visible low-level illumination while retaining a relatively narrow footprint. The round base continues the cylindrical form and is designed for ground mounting.

This bollard uses a built-in 9.5W SMD LED module, so no separate bulb is required. It produces 4000K neutral white light with a CRI above 80. The manufacturer specifies a source output of 1100 lumens.

Light is emitted directly through the elongated opal diffuser, helping spread illumination from the upper section of the fitting rather than from a single exposed point. This makes the Etere suitable for defining paths, entrances and other exterior circulation areas.

The integrated LED is not replaceable. The fitting is non-dimmable and operates with standard on/off control. Its built-in electronic driver is included and is specified by the manufacturer as replaceable by qualified operators only.

• Garden paths and walkways
• Patio and terrace lighting
• Exterior entrances and approach routes
• Driveway edges and pedestrian areas
• Contemporary garden landscaping
• Outdoor spaces requiring neutral white 4000K illumination
• Locations suited to an IP44 ground-mounted fitting

• Integrated 9.5W LED means there is no separate bulb to purchase.
• 4000K colour temperature provides clear neutral white illumination for practical outdoor areas.
• 1100 lumen useful light output provides defined illumination from a relatively slim bollard.
• Opal plastic diffuser softens the appearance of the LED source and distributes light through the upper section.
• IP44 protection makes the fitting suitable for normal outdoor exposure to splashing water.
• Black powder-coated cast aluminium body suits contemporary exterior schemes.
• 60.5 cm height works well for marking paths, boundaries and circulation routes at low level.
• Class I construction provides an earthed electrical installation.

• Combines a narrow 12 cm diameter with a practical 60.5 cm bollard height.
• Integrated LED provides a complete light source without replaceable lamps.
• Neutral white output is well suited to paths, entrances and functional exterior lighting.
• Simple cylindrical styling coordinates easily with modern outdoor architecture and landscaping.
• IP44 protection and ground-mounted construction are designed specifically for exterior use.

Does the Ideal Lux Etere 322278 need a separate bulb?

No. It has a built-in 9.5W SMD LED module, so there is no separate bulb to purchase or fit. The integrated LED itself is specified as non-replaceable.

What colour light does this bollard produce?

The integrated LED produces 4000K neutral white light. This gives a clearer, more functional appearance than warmer 3000K lighting and is well suited to paths, entrances and other exterior circulation areas.

Is the Etere 322278 suitable for outdoor use?

Yes. It has an IP44 rating and is designed as an outdoor ground-mounted bollard. IP44 protection makes it suitable for normal exterior locations exposed to splashing water, but it should not be installed where it will be submerged.

Can this outdoor bollard be dimmed?

No. The manufacturer specifies the Etere 322278 as non-dimmable with on/off operation.

How large is the Etere 322278?

The bollard is 60.5 cm high and 12 cm in diameter. Its slim cylindrical shape makes it suitable for positioning beside paths and landscaping without requiring a wide installation footprint.