Etere - Black LED Wall Lamp with White Diffuser 3000K

The Etere has a simple cylindrical linear profile with a black finish that gives the fitting a modern architectural look. Its light body is made from powder-coated cast aluminium, while the elongated opal plastic diffuser forms the main visible face of the fitting.

At 30 cm wide and only 7 cm high, the design sits neatly against the wall without appearing bulky. The opal diffuser contrasts with the black body and conceals the integrated LED source, giving the fitting a clean, uncluttered appearance when switched on or off.

A built-in 9.5W SMD LED module produces warm white light at 3000K. The current technical specification gives a source output of 1000 lumens, with direct light emission through the opal diffuser. A CRI above 90 provides good colour rendering for illuminated exterior surfaces and entrance areas.

The LED source is integrated rather than a replaceable bulb, so no separate lamp is required. Ideal Lux specifies an LED life of 25,000 hours under the stated test conditions. The fitting is non-dimmable and operates with straightforward on/off control.

IP44 protection makes it suitable for appropriate outdoor wall locations where protection against splashing water is required. Installation should be carried out by a qualified electrician.

• Exterior entrance and doorway lighting
• Patio and terrace walls
• Covered outdoor seating areas
• Modern house facades
• Contemporary architectural schemes
• Locations requiring a compact 10 cm wall projection
• Outdoor areas where warm white 3000K lighting is preferred

• Integrated 9.5W LED source means no separate bulb is required.
• Warm white 3000K output provides comfortable exterior illumination.
• CRI above 90 supports accurate colour appearance under the light.
• Opal diffuser conceals the LED module and spreads light across the linear face.
• IP44 protection supports use in suitable outdoor wall locations.
• Powder-coated cast aluminium body provides a clearly defined black exterior finish.
• Compact 10 cm projection helps the fitting remain relatively close to the wall.
• Direct light emission makes it suitable for illuminating the immediate wall and surrounding area.

• A slim 30 cm linear design suits modern exterior architecture.
• The integrated LED system removes the need to select or replace conventional bulbs.
• Warm white output is suitable for residential entrances, patios and terraces.
• IP44 protection provides the level of splash resistance required for suitable exterior applications.
• The black finish and opal diffuser create a simple two-tone appearance that coordinates easily with contemporary exterior finishes.

Does the Ideal Lux Etere 322193 need a separate bulb?

No. It has a built-in 9.5W SMD LED module, so there is no separate bulb to purchase. The integrated light source is specified as non-replaceable.

Is this outdoor wall light dimmable?

No. Ideal Lux specifies the Etere 322193 as non-dimmable with standard on/off operation.

What colour light does it produce?

The integrated LED produces warm white light at 3000K. The current technical specification lists 1000 source lumens.

Can the Etere 322193 be installed outdoors?

Yes. The fitting has an IP44 rating and is designed as an outdoor wall light. It is suitable for appropriate exterior locations where protection against splashing water is required.

How far does the fitting project from the wall?

The Etere projects 10 cm from the wall. Its overall dimensions are 30 cm wide by 7 cm high, giving it a slim linear profile for exterior wall installations.