Style - IP54 White LED Post 3000K - 100 cm

The Style 318707 has a tall, narrow rectangular profile with a subtly projecting upper section that directs the light downwards. Its aluminium body is finished in white using a powder-coated surface, creating a simple architectural appearance that suits contemporary outdoor settings.

An opal plastic diffuser sits beneath the upper section, concealing the integrated LED source and softening its appearance when illuminated. At 100 cm high, the bollard has enough presence for pathways and landscaped areas without requiring a large base footprint.

The fitting uses an integrated 8.5W SMD LED module, so no separate bulb is required. It produces warm white light at 3000K with a source output of 950 lumens. A CRI above 90 provides good colour rendering, while the 120° beam spreads the direct light across the area below and around the bollard.

The integrated LED has a stated lifetime of 30,000 hours. The light source itself is not replaceable, although the built-in electronic driver is replaceable by a qualified operator. Control is simple on/off operation, and the fitting is non-dimmable.

Its IP54 rating provides protection against limited dust ingress and splashing water, making the bollard suitable for normal outdoor locations such as paths, patios and garden areas.

• Garden paths and pedestrian walkways
• Driveway edges and approach routes
• Patios and paved outdoor areas
• Modern residential entrances
• Landscaped gardens and planted areas
• Contemporary exterior architecture
• Outdoor locations requiring a 100 cm bollard light

• Integrated 8.5W LED means there is no separate bulb to purchase.
• Warm white 3000K light suits residential gardens, paths and entrance areas.
• 950 lumens of useful light provide practical illumination around the fitting.
• 120° beam angle distributes light across a broad area beneath the bollard.
• CRI above 90 helps outdoor colours and surfaces appear natural under the light.
• IP54 protection makes the fitting suitable for normal outdoor exposure.
• Powder-coated aluminium body provides a clean, modern exterior appearance.
• Opal diffuser conceals the LED source and gives the illuminated section a softer visual finish.
• The built-in driver can be replaced by a qualified operator if required.

• Combines a slim architectural shape with practical outdoor illumination.
• Integrated LED design avoids the need to select and replace conventional bulbs.
• The 100 cm height works well for defining paths, entrances and landscaped boundaries.
• Direct downward illumination helps place useful light where it is needed around the bollard.
• A compact 13.9 cm by 12.5 cm footprint suits installations where ground space is limited.
• The white finish offers an alternative to darker anthracite or black exterior fittings.

Does the Ideal Lux Style 318707 need a bulb?

No. This outdoor bollard has an integrated 8.5W SMD LED module, so there is no separate bulb to purchase or install. The integrated light source is not replaceable.

Is the Style 318707 dimmable?

No. The manufacturer specifies this model as non-dimmable. It is designed for standard on/off operation using its built-in electronic LED driver.

Can this bollard light be installed outdoors?

Yes. The Style 318707 has an IP54 rating and is designed as an outdoor ground-mounted fitting. It is suitable for normal exterior locations including garden paths, paved areas, entrances and landscaped spaces.

How large is the Ideal Lux Style 318707?

The fitting is 100 cm high, 13.9 cm wide and 12.5 cm deep. Its tall, narrow proportions make it suitable for defining pathways or boundaries without taking up a large amount of ground space.

What colour light does it produce?

The integrated LED produces warm white light at 3000K. The current technical specification lists 950 lumens from the LED source and 740 lumens of useful light, with a 120° beam angle and CRI above 90.