Atom - IP54 Anthracite Up&Down Wall Lamp 3000K

The Atom AP D10 has a clean cubic profile measuring 10 cm high, 10 cm wide and 10 cm deep. Its powder-coated aluminium body is finished in anthracite, giving the fitting a restrained appearance suited to contemporary architecture. Glass diffusers are positioned to support the upward and downward light emission.

The simple geometry keeps the fitting visually compact during daylight, while the twin light beams create a more distinctive effect after dark. Movable fins inside the fitting can be adjusted to alter the width of the beams projected onto the wall.

A built-in 12W COB LED module provides warm white light at 3000K, with a useful light output of 1050 lumens and a CRI above 90. The source produces direct and indirect illumination, casting light both upwards and downwards rather than projecting primarily out into the surrounding area.

The width of each wall-washing beam can be altered using movable fins, making it possible to create narrower or broader patterns to suit the wall surface and desired visual effect. The integrated LED has a stated operating life of 30,000 hours and does not use a replaceable household bulb.

This model is non-dimmable and operates with on/off control. Its driver is built into the fitting and included, with driver replacement intended for qualified operators.

• Exterior house walls and façades
• Entrance and doorway lighting
• Terraces and patios
• Balcony walls
• Garden and boundary walls
• Contemporary exterior architecture
• Installations where an adjustable up and down wall effect is wanted

• Integrated 12W COB LED removes the need to purchase a separate bulb.
• 3000K colour temperature provides warm white exterior lighting.
• 1050 lumen useful light output provides defined illumination from a compact fitting.
• Upward and downward emission creates two separate lighting effects on the wall.
• Movable fins allow the width of the light beams to be adjusted after installation.
• CRI above 90 provides strong colour rendering.
• IP54 protection makes the fitting suitable for appropriate exterior wall installations.
• Compact 10 cm cube dimensions suit locations where a discreet wall fitting is preferred.
• Powder-coated aluminium body and glass diffusers are designed for the fitting's outdoor application.

• Creates an architectural up-and-down lighting effect from a compact wall fitting.
• Adjustable beam width provides more control over the pattern of light on the wall.
• Integrated LED combines the light source and fitting in one installation.
• IP54 protection supports use on suitable exterior walls.
• Anthracite finish and simple cubic styling coordinate easily with modern exterior materials and finishes.
• Warm white 3000K output is suited to entrances, terraces and residential façades.

Can the light beams be adjusted?

Yes. The Atom AP D10 has movable fins that allow the width of the upward and downward light beams to be adjusted. This lets the installer alter the shape of the light pattern projected onto the wall.

Is the LED included?

Yes. A 12W COB LED module is integrated into the fitting, so no separate bulb is required. It produces 3000K warm white light with a useful output of 1050 lumens and a CRI above 90.

Is the Ideal Lux Atom 313429 dimmable?

No. The current technical specification confirms that this version is non-dimmable and designed for standard on/off control.

Can this wall light be installed outdoors?

Yes. The fitting is rated IP54 and is designed as an outdoor wall light. It is suitable for applications such as façades, entrances, terraces, balconies and other appropriate exterior wall locations.

How large is the Atom AP D10?

The fitting measures 10 cm high, 10 cm wide and 10 cm deep. Its compact cube shape makes it suitable where an architectural up-and-down lighting effect is wanted without using a large wall fitting.