Omega - IP54 Black LED Wall Lamp 4000K

Omega AP Square has a simple geometric appearance centred around a compact 9 cm square body. The light body is made from powder-coated aluminium in a black finish, creating a restrained contemporary look that works particularly well with modern exterior architecture.

The adjustable diffuser section incorporates a glass screen and can be tilted away from its resting position. This movement changes both the projection of the fitting and the direction of the light. With the diffuser positioned closer to the body, projection is 8.5 cm, increasing to a maximum of 12 cm as it is adjusted.

The fitting uses an integrated 7W COB LED light source, so no separate bulb is required. It produces a 4000K neutral white light with a light beam flux of 650 lumens and direct light emission. A 120° beam angle provides a relatively broad spread of light rather than a narrow spotlight effect.

The diffuser can be tilted vertically through 0° to 90°, helping direct the illumination towards the area where it is most useful. This makes Omega suitable for lighting entrances, paths, architectural surfaces or other defined exterior areas. The fitting is non-dimmable and operates with standard on/off control.

The integrated LED has a stated operating life of 25,000 hours at the manufacturer's specified test conditions. The light source itself is not user replaceable.

• Contemporary exterior walls and facades
• Entrance and doorway lighting
• Covered patios, terraces and balconies
• Lighting beside exterior walkways and access areas
• Modern residential and commercial exteriors
• Locations where an adjustable direction of light is useful
• Wall or ceiling mounting in suitable IP54 applications

• Integrated 7W LED means there is no separate bulb to purchase.
• 610 lumen output provides useful illumination from a compact fitting.
• 4000K neutral white light is well suited to functional exterior lighting.
• Adjustable diffuser allows the direction of the light to be changed after installation.
• 0° to 90° vertical adjustment provides flexibility when positioning the beam.
• 120° beam angle distributes light across a wider area than a narrow spot beam.
• IP54 protection supports installation in appropriate outdoor locations.
• Powder-coated aluminium body and glass screen give the fitting its clean square appearance.
• Compact 9 cm by 9 cm dimensions suit installations where a low-profile light is preferred.

• Combines a compact exterior fitting with adjustable direct illumination.
• Suitable for both wall and ceiling installation, providing additional positioning flexibility.
• Integrated LED removes the need to select and replace a conventional lamp.
• Black square styling fits naturally with contemporary exterior schemes.
• IP54 protection makes it suitable for a range of sheltered and exposed outdoor applications when correctly installed.

Does the Ideal Lux Omega 285535 need a separate bulb?

No. It has an integrated 7W COB LED light source, so a separate bulb is not required. The LED produces 610 lumens of 4000K neutral white light.

Can the direction of the light be adjusted?

Yes. The diffuser can be tilted vertically from 0° to 90°. This allows the direct light to be aimed towards a wall, pathway, entrance or another area that needs illumination.

Is this light suitable for outdoor use?

Yes. The Omega AP Square has an IP54 rating, providing protection against limited dust ingress and splashing water. It is designed as an outdoor wall or ceiling fitting and should be installed correctly for the intended location.

Is the Omega 285535 dimmable?

No. The integrated LED version supplied under product code 285535 is specified as non-dimmable and is intended for standard on/off operation.

Can this fitting be mounted on a ceiling?

Yes. Ideal Lux identifies the Omega AP Square as suitable for both wall and ceiling installation. Its adjustable diffuser can then be positioned to direct the light to suit the mounting location.