Style - IP54 Anthracite PIR Wall Lamp 3000K

The Style AP Sensor has a clean, geometric appearance with a powder-coated aluminium body in an anthracite finish. Its upper lighting section projects forward at an angle, giving the fitting a contemporary architectural shape while directing the light away from the wall.

An opal plastic diffuser covers the LED source and creates a more even visible light surface. The PIR sensor is positioned on the front of the lower wall-mounted section, keeping the sensor integrated into the overall design rather than requiring a separate detector.

A 9W integrated SMD LED provides warm white light at 3000K, so there is no separate replaceable bulb to purchase. The manufacturer describes the light emission as direct, with the angled upper section directing illumination towards the area in front of and below the fitting.

The built-in PIR motion sensor has a detection angle of 120° and a stated detection distance of 6 to 9 metres. The operating duration can be adjusted from 5 seconds to 8 minutes, and the sensor also has an adjustable LUX control for setting the ambient light level at which motion activation operates.

The fitting is non-dimmable. Its LED light source and control gear can be replaced by a qualified professional rather than by the user.

• Exterior entrance and doorway lighting
• Walls beside gates and access routes
• Patios and covered outdoor seating areas
• Paths and circulation areas around the home
• Garages, side passages and utility entrances
• Modern and contemporary exterior schemes
• Locations where automatic motion-activated lighting is useful

• Integrated 9W SMD LED means no separate bulb is required.
• Warm white 3000K colour temperature provides comfortable exterior illumination.
• Built-in PIR sensor automatically activates the light when movement is detected.
• 120° sensor coverage helps monitor movement across the area in front of the fitting.
• 6 to 9 metre stated detection range suits entrances, paths and similar outdoor areas.
• Adjustable 5-second to 8-minute operating time provides control over how long the light remains on after activation.
• Adjustable LUX control allows motion activation to be set according to surrounding light levels.
• IP54 protection makes the fitting suitable for outdoor wall installation.
• Powder-coated aluminium body and anthracite finish give the fitting a clean contemporary appearance.

• Combines exterior lighting and motion detection in one compact wall fitting.
• Integrated LED removes the need to select and install a separate lamp.
• Adjustable sensor timing and LUX settings provide useful control over automatic operation.
• IP54 protection supports use on exterior walls exposed to normal outdoor conditions.
• Compact dimensions of 16.5 cm high, 10 cm wide and 10.5 cm projection suit areas where a large wall light would be unnecessary.

Does the Ideal Lux Style 246864 need a separate bulb?

No. It uses a built-in 9W SMD LED light source, so there is no separate bulb to purchase or install. The manufacturer states that the LED source and control gear are replaceable by a qualified professional.

How far does the PIR motion sensor detect movement?

The manufacturer states a detection distance of 6 to 9 metres with a 120° detection angle. Actual detection can depend on the installation position, direction of movement and surrounding conditions.

Can the sensor settings be adjusted?

Yes. The operating time can be adjusted from 5 seconds to 8 minutes. A separate LUX control allows the ambient light threshold for motion activation to be adjusted.

Can this wall light be used outdoors?

Yes. The fitting has an IP54 rating and is designed as an outdoor wall light. It is suitable for locations such as entrances, exterior walls, paths, patios and access areas when correctly installed.

Is the Ideal Lux Style 246864 dimmable?

No. Product-specific retailer specifications identify this integrated LED version as non-dimmable.