Luna - IP44 White Ceiling Lamp 20 cm

The Luna has a simple cube-shaped diffuser measuring approximately 20 cm across, creating a neat geometric appearance without exposed lamps or decorative detailing. Its body is made from die-cast aluminium with a powder-coated finish, while the opal plastic diffuser forms the main visible surface.

The white and opal colouring keeps the design understated and easy to coordinate with pale render, contemporary exterior walls and modern architectural finishes. When illuminated, the opaque diffuser hides the direct view of the bulb and provides a more even visible glow across the fitting.

The Luna PL1 D20 uses one replaceable E27 bulb, which is not included. Ideal Lux specifies a traditional maximum of 42W and recommends its 9W E27 LED drop-shaped bulb as a suitable option, confirming LED compatibility. 

The opal diffuser produces diffuse light rather than a concentrated beam, making the fitting useful for general exterior illumination around entrances, walls and covered circulation areas. Ideal Lux's technical sheet lists this model as non-dimmable, so it should be treated as an on/off fitting rather than used as part of a dimming installation.

With an IP44 rating and Class II insulation, the fitting is designed for fixed mains installation and can be mounted on a ceiling or wall where its protection rating is appropriate for the location.

• Outdoor entrance and porch lighting
• Exterior ceiling installations
• Wall-mounted lighting around terraces and balconies
• Modern and minimalist exterior schemes
• Locations requiring an IP44-rated fitting
• Compact spaces where a fitting around 20 cm wide is appropriate
• Applications where soft, diffuse general light is preferred to an exposed bulb

• IP44 protection makes the fitting suitable for appropriate outdoor locations exposed to splashing water.
• Opal diffuser softens the appearance of the light and keeps the bulb out of direct view.
• Single E27 lampholder provides a straightforward choice of compatible replacement bulbs.
• LED compatible, with Ideal Lux recommending a 9W E27 LED bulb for this model.
• Compact 20 cm square format suits areas where a large exterior light would be visually intrusive.
• Can be installed on a ceiling or wall for greater placement flexibility.
• Class II construction provides double-insulated electrical protection.
• Powder-coated die-cast aluminium body is combined with a lightweight opal plastic diffuser.

• Clean cubic design provides a simple alternative to traditional lantern-style outdoor lighting.
• Diffuse light emission is useful for general illumination rather than a narrow directional beam.
• Replaceable E27 bulb format makes future lamp replacement straightforward.
• Wall or ceiling mounting allows the same design to be used in different exterior positions.
• IP44 protection supports use in suitable exterior locations.
• Neutral white and opal appearance coordinates easily with many contemporary building finishes.

Is the bulb included with the Luna PL1 D20?

No. The fitting uses one E27 bulb, which must be purchased separately. Ideal Lux recommends a 9W E27 LED drop-shaped bulb with a 4000K colour temperature and CRI 80 for this model.

Can I use an LED bulb?

Yes. LED compatibility is confirmed because Ideal Lux specifies a 9W E27 LED bulb as its recommended lamp for the Luna PL1 D20. The fitting has a replaceable E27 lampholder rather than an integrated LED module.

Is this outdoor light dimmable?

No. Ideal Lux's technical information lists the Luna PL1 D20 as non-dimmable. It should therefore be used as an on/off fitting rather than connected to a dimmer.

Can the Luna PL1 D20 be mounted on a wall as well as a ceiling?

Yes. The manufacturer's product information describes the Luna as an outdoor ceiling or wall-mounted fitting. This gives you flexibility to use its cubic design above an entrance or vertically on an exterior wall.

Is the Luna PL1 D20 suitable for outdoor use?

Yes. It has an IP44 rating, providing protection against solid objects larger than 1 mm and splashing water. It should be installed in a location where IP44 is suitable for the expected exposure and local electrical requirements.