Marietta - Antique Brass 3 Light Centre Fitting with Clear Glass Rods

The Marietta is finished in antique brass, bringing a warm metallic tone to its circular frame, ceiling rose, chain and curved supporting arms. Its design offers a contemporary interpretation of a traditional chandelier, with a compact arrangement of three lights positioned inside the decorative outer structure.

Clear glass rods are arranged vertically around the fitting in several rows. Their transparent surfaces catch and refract the light while leaving the internal lamp holders partly visible. The combination of antique brass and clear glass works particularly well with classic, traditional and decorative contemporary interiors.

Three E14 lamp holders position the bulbs at separate points within the circular frame, providing light from more than one direction. The surrounding clear glass rods help diffuse and break up the light, adding decorative reflections around the fitting.

Each lamp holder accepts an E14 LED bulb with a verified maximum of 7W. Bulbs are not included, so the brightness and colour temperature can be selected to suit the room. The fitting is compatible with dimmable E14 LED bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

The chain is adjustable during installation, providing a total fitting height from approximately 60 cm to 168 cm. This flexibility makes it easier to position the pendant at a suitable level above furniture or within rooms of different ceiling heights.

• Dining rooms and positioning above dining tables
• Living rooms requiring a decorative central pendant
• Bedrooms with suitable ceiling height
• Entrance halls and spacious hallways
• Classic and traditional interior schemes
• Decorative contemporary rooms with warm metallic accents
• Dry indoor areas where adjustable suspension is useful

• Three separate lamp holders distribute light around the centre of the fitting.
• Clear glass rods soften the view of the bulbs and create decorative reflections.
• Antique brass finish adds a warm metallic detail to the room.
• Adjustable chain supports installation at heights between 60 cm and 168 cm.
• Replaceable E14 bulbs provide control over brightness and colour temperature.
• Compatible with LED bulbs up to 7W per lamp holder.
• Dimming compatibility supports adjustable light levels with suitable equipment.
• A 40 cm diameter provides decorative impact without the width of a large chandelier.
• Coordinates with other fittings in the Endon Marietta collection.

• Combines chandelier-inspired styling with a compact three-light arrangement.
• Offers an adjustable drop for different ceiling heights and furniture layouts.
• Pairs warm antique brass with clear decorative glass.
• Uses readily replaceable E14 LED bulbs rather than a fixed light source.
• Provides optional dimming when suitable bulbs and controls are installed.
• Works as a coordinated part of the wider Marietta lighting range.

Are bulbs included with the Endon Marietta 99167?

No. The fitting requires three E14 LED bulbs, which must be purchased separately. Each lamp holder accepts a maximum 7W LED bulb, allowing you to choose a suitable brightness and colour temperature for the room.

Can the height of the Marietta pendant be adjusted?

Yes. The chain can be shortened during installation to provide a total fitting height between approximately 60 cm and 168 cm. The required height should be agreed before the electrician completes the installation.

Can this three-light pendant be dimmed?

Yes. It is compatible with dimmable E14 LED bulbs when connected to a suitable wall dimmer. All three bulbs should be dimmable, and the selected bulbs must be compatible with the dimmer switch.

Is the Marietta 99167 suitable for a low ceiling?

The minimum installed height is approximately 60 cm, so it is better suited to rooms with enough headroom for a suspended fitting. For lower ceilings or circulation areas, a flush or semi-flush fitting may be more practical.

Can this pendant be installed in a bathroom?

The fitting has an IP20 rating and is intended for dry indoor rooms. It should not be installed in bathroom zones or other areas where protection against moisture or splashing water is required.