Lainey - Antique Brass 4 Light Pendant with Crystal Bobeche

Lainey combines a steel structure in an antique brass finish with clear crystal glass details. Its four candle-style lampholders are arranged around a central stem and supported by a decorative rope-chain suspension, creating the appearance of a traditional chandelier without an enclosed shade. The clear crystal elements add detail around each light source and remain visible whether the fitting is switched on or off. With a diameter of 48 cm, the design has enough presence to form a focal point while remaining suitable for a range of domestic interiors.

The fitting uses four E14 bulbs, with candle-shaped lamps specified for this model. Bulbs are not included, so four suitable lamps need to be purchased separately. The open arrangement positions the bulbs around the fitting rather than behind an enclosed diffuser, helping distribute light from four individual points.

Lainey is compatible with LED lamps. Where no product-specific LED maximum is stated, an LED bulb up to 5W per lampholder is recommended in place of the traditional 40W rating. It is also compatible with dimmable E14 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

The suspension height can be adjusted before installation by altering the cable position and removing chain links, providing a verified drop range of 60 cm to 100 cm.

• Dining rooms where a decorative four-light pendant is required
• Living rooms with classic or elegant interior schemes
• Entrance halls and hallways with suitable ceiling height
• Positioning above a dining table or central furniture arrangement
• Rooms suited to antique brass finishes and clear crystal detail
• Indoor locations where an adjustable 60 cm to 100 cm drop is suitable

• Four E14 light sources distribute illumination from several points around the fitting.
• Antique brass finish provides a warm, classic decorative appearance.
• Clear crystal glass details add visible decorative interest around the lampholders.
• Adjustable 60 cm to 100 cm drop offers flexibility for different ceiling heights.
• Height can be altered using the cable adjustment and removable chain links.
• Compatible with LED bulbs for a choice of suitable lamp technologies.
• Dimming compatibility allows light output to be adjusted when suitable dimmable bulbs and a matching wall dimmer are used.
• Class I construction provides an earthed mains-wired installation.

• Combines a traditional chandelier-inspired shape with a relatively compact 48 cm diameter.
• Four separately positioned bulbs provide a more distributed light source than a single-lamp pendant.
• Adjustable suspension makes it easier to set an appropriate finished height during installation.
• Replaceable E14 bulbs allow the colour temperature and brightness to be selected to suit the room.
• The antique brass and clear crystal combination works well where decorative lighting is intended to remain a visible feature of the interior.

Are the bulbs included with the Endon Lainey 81916?

No. Four E14 candle-shaped bulbs need to be purchased separately. LED bulbs are compatible, with up to 5W LED per bulb recommended where a product-specific LED maximum has not been stated.

Is the Endon Lainey 81916 dimmable?

Yes. It is compatible with dimmable E14 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

Can the hanging height be adjusted?

Yes. The pendant has an adjustable drop from 60 cm to 100 cm. During installation, the cable can be adjusted through the cord grip, and chain links can be removed to set the required finished height.

Can this pendant be installed in a bathroom?

No. The manufacturer's installation instructions specify that the fitting is for indoor use and is not suitable for bathroom locations. Its IP20 rating is intended for dry indoor areas rather than locations requiring enhanced moisture protection.

Does this fitting need to be earthed?

Yes. Lainey is a Class I mains-wired fitting and must be connected to earth. The installation instructions also require a solid mounting point capable of supporting the fitting, so installation should follow applicable electrical and building regulations.