Rossano - Warm Brass 10 Light Centre Fitting with Clear & Frosted Glass

The Rossano has a distinctive multi-arm form finished in warm brass, with ten glass shades arranged around the central structure. Each light combines clear outer glass with a frosted inner glass element, adding visual depth while partially screening the lamp inside. The mixture of warm metallic tones, clear glass and frosted detailing gives the pendant a contemporary decorative character that suits modern and elegant interiors. Steel and glass construction supports the structured, branching design, while the 70 cm diameter gives the fitting a noticeable presence without relying on a traditional chandelier silhouette.

Ten separate G9 lamp holders spread the light across the full width of the fitting rather than concentrating illumination at a single point. The clear outer glass allows light to pass through, while the frosted inner glass helps soften direct glare around each lamp.

The pendant requires 10 x G9 LED bulbs, with a verified maximum of 3.2W LED per bulb. Bulbs are not included. It is compatible with dimmable G9 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

A telescopic stem allows the overall drop to be set between 36.5 cm and 66.5 cm during installation. This provides useful flexibility when positioning the pendant above a dining table or adapting it to different ceiling heights.

• Dining rooms and positioning above larger dining tables
• Kitchen dining areas and suitably sized kitchen islands
• Living rooms needing a wide decorative ceiling feature
• Open-plan kitchen, dining and living spaces
• Contemporary interiors with warm metallic finishes
• Rooms with enough width to accommodate its 70 cm diameter
• Indoor dry areas where an IP20 fitting is appropriate

• 10-light arrangement distributes illumination from multiple points across the fitting.
• Warm brass finish adds a soft metallic accent to contemporary interiors.
• Clear outer glass and frosted inner glass create a layered decorative appearance.
• Frosted inner shades help soften the direct view of the G9 lamps.
• Adjustable 36.5 cm to 66.5 cm drop provides flexibility when setting the installation height.
• Uses replaceable G9 LED bulbs, so individual lamps can be replaced when required.
• Compatible with dimmable G9 bulbs and a suitable dimmer switch.
• 70 cm diameter gives the fitting enough scale for larger dining and open-plan areas.

• Combines ten light sources with a decorative branching form for broad visual impact.
• Adjustable height makes it easier to position the pendant appropriately above furniture.
• Clear and frosted glass provides more visual detail than a simple exposed-lamp fitting.
• Replaceable G9 LED lamps offer straightforward future bulb replacement.
• The warm brass finish works well with neutral, dark and warm-toned interior schemes.
• Its substantial diameter makes it particularly suited to spaces where a larger ceiling fitting is required.

What bulbs does the Endon Rossano 124805 use?

It uses 10 x G9 LED bulbs with a verified maximum of 3.2W LED per bulb. The bulbs are not supplied with the fitting, so ten suitable G9 LED lamps will need to be purchased separately.

Is the Rossano 124805 dimmable?

Yes. It is compatible with dimmable G9 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

Can the height of this pendant be adjusted?

Yes. The telescopic stem allows the overall drop to be adjusted from 36.5 cm to 66.5 cm during installation, helping you position the fitting at a suitable height for the room and furniture below.

How large is the Rossano 10-light pendant?

The fitting measures 70 cm in diameter, with an adjustable height of 36.5 cm to 66.5 cm. Its relatively wide design is best suited to rooms with enough clear ceiling space to accommodate the branching arrangement.

Can this pendant be used in a bathroom?

The Rossano is rated IP20 and is intended for indoor dry areas. It should not be treated as a bathroom-rated fitting unless the proposed installation location complies with the relevant electrical and bathroom-zone requirements.