Antalya - Antique Brass Semi Flush with Clear Glass

The Antalya combines an antique brass finish with clear glass panels arranged within a solid brass shade frame. Steel is also used within the construction. Its clear glazing keeps the centre of the fitting visually open, while the warm brass colour adds decorative contrast around the edges and ceiling plate. The exposed lamp forms part of the finished appearance rather than being hidden behind an opaque diffuser. With a diameter of 34.5 cm, the fitting has enough presence to act as a decorative ceiling feature while retaining the practical proportions of a flush design.

This is a single-light, mains-wired ceiling fitting using a replaceable E27 LED bulb, with a verified maximum of 10W LED per bulb. The bulb is not included, so the required lamp must be purchased separately. Clear glass surrounds the exposed light source, allowing illumination to pass through the shade rather than being concentrated through a solid diffuser.

The Antalya is compatible with dimmable E27 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly. Its IP20 rating makes it suitable for dry indoor areas rather than locations requiring enhanced protection against moisture.

• Hallways and landings where a pendant would hang too low
• Bedrooms needing a decorative flush ceiling light
• Living rooms with antique brass or warm metallic details
• Dining areas where ceiling height restricts pendant lighting
• Dry indoor spaces covered by an IP20 rating
• Classic and modern-classic interiors

• Flush ceiling format reduces the amount of downward suspension compared with a pendant.
• Antique brass finish adds a warm decorative metallic detail.
• Solid brass shade frame surrounds the clear glass panels.
• Clear glass keeps the lamp visible and allows light to pass through the sides.
• Replaceable E27 bulb makes the light source straightforward to renew when required.
• Compatible with LED lamps up to the verified 10W LED limit.
• Dimming is possible with a suitable dimmable E27 bulb and compatible dimmer switch.
• Class I construction provides an earthed hardwired installation.

• Provides a decorative brass and glass alternative to a plain flush ceiling light.
• Suitable where the available ceiling height makes a hanging pendant less practical.
• Uses a replaceable bulb rather than a permanently integrated light source.
• Clear glazing keeps the design visually open and showcases the chosen bulb.
• The 34.5 cm diameter offers a noticeable ceiling feature without requiring a suspended drop.

Is the bulb included with the Endon Antalya 122556?

No. The bulb must be purchased separately. The fitting uses one E27 LED bulb with a verified maximum rating of 10W LED per bulb.

Can this ceiling light be dimmed?

Yes. It is compatible with dimmable E27 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

Is the Antalya suitable for low ceilings?

Its flush design makes it particularly useful where a hanging pendant would project too far into the room. The fitting measures 35 cm in projection and 34.5 cm in diameter.

Can this light be used in a bathroom?

The fitting is rated IP20 and is intended for dry indoor areas. It should not be treated as a bathroom fitting where a higher level of moisture protection is required.

Does the fitting need to be wired into the ceiling?

Yes. The Antalya is a hardwired Class I ceiling fitting and requires an earth connection as part of the installation. Electrical installation should be carried out in accordance with applicable wiring requirements.