Carlson XL - Warm Brass Floor Lamp with Natural Linen Shade

The Carlson XL has a tall, sweeping arch supported by a steel structure in a warm brass-plated finish. Its natural fabric shade softens the appearance of the large frame and adds texture without making the design overly decorative. The combination works well with contemporary, modern classic and understated interiors.

With a height of 200 cm, width of 45 cm and depth of 139 cm, this is a substantial floor lamp rather than a compact reading light. Its extended arm positions the shade away from the base, making it well suited to placing beside a sofa or armchair while bringing the light source over the seating area.

The lamp uses one E27 LED bulb with a verified maximum of 10W LED. The bulb is not included, so the colour temperature and brightness can be selected to suit the room and intended use. Its natural fabric shade helps soften the light while the arched design positions illumination away from the floor lamp base.

The shade angle is adjustable, providing some control over where the light is directed. An easy-reach on/off switch is located at the lamp holder, and a 200 cm black fabric cable connects the lamp to a standard power socket.

This model provides on/off control only and is not dimmable. It is IP20 rated and intended for dry indoor spaces.

• Living rooms where a large floor lamp can sit beside a sofa or armchair
• Reading areas that benefit from light positioned above the seating position
• Larger lounges with space for its 139 cm overall depth
• Contemporary interiors with warm metallic finishes
• Modern classic rooms using neutral fabrics and brass tones
• Dry indoor spaces where a plug-in light avoids the need for ceiling wiring

• Large arch design extends the light source away from the base and towards a seating area.
• Warm brass-plated finish adds a softer metallic tone to the tall steel frame.
• Natural fabric shade diffuses the appearance of the bulb and complements neutral interiors.
• Adjustable shade angle helps position the light more effectively for the space.
• Uses a replaceable E27 LED bulb, allowing the light colour and output to be chosen separately.
• 10W LED maximum provides a clear product-specific lamp limit.
• Lamp holder on/off switch is positioned within easy reach.
• 200 cm fabric-covered cable offers practical positioning near a suitable socket.
• Class II double-insulated construction does not rely on an earth connection within the fitting.

• Provides an overhead-style light from a freestanding plug-in lamp.
• Its 200 cm height and extended arch make it suitable for larger seating arrangements.
• The adjustable shade adds useful flexibility when directing the light.
• Warm brass and natural fabric create an easy-to-coordinate combination of metallic and neutral finishes.
• A replaceable E27 LED bulb makes future lamp replacement straightforward.

What bulb does the Endon Carlson XL 122264 use?

It uses one E27 LED bulb with a maximum wattage of 10W LED. The bulb is not supplied, so you can choose an appropriate colour temperature and light output for your room.

Is the Carlson XL floor lamp dimmable?

No. This plug-in floor lamp provides on/off control through the switch at the lamp holder and is not dimmable.

Can the shade be adjusted?

Yes. The shade angle can be adjusted, helping you position the light towards a sofa, armchair or reading area rather than relying on one fixed direction.

How much space does this floor lamp need?

The Carlson XL measures 200 cm high, 45 cm wide and 139 cm deep. Its long arch takes up considerably more horizontal space than a conventional upright floor lamp, so the intended position should be measured before ordering.

Can this lamp be used in a bathroom or outdoors?

No. The lamp is IP20 rated and intended for dry indoor areas. It should not be used outdoors or in locations where protection from moisture or water is required.