Harborne - Antique Brass Semi Flush with Clear Ribbed Glass

The Harborne combines an antique brass plated finish with a curved clear ribbed glass shade. The ribbed surface adds visible texture and catches the light when the fitting is illuminated, while the clear glass leaves the bulb visible through the shade.

Steel and glass construction gives the fitting a mix of solid metal detailing and decorative glass. Its rounded 30 cm profile and close-to-ceiling design make it suitable for interiors that need a decorative ceiling light without a long suspension.

This ceiling light uses one E27 LED bulb with a verified maximum of 10W LED. The bulb is purchased separately, giving you the flexibility to choose a suitable colour temperature and light output for the room.

The clear ribbed glass allows light to pass through while adding texture to the illuminated appearance. With only 23 cm of projection from the ceiling, the fitting is especially useful where headroom is limited.

As a mains-wired ceiling fitting with a replaceable E27 bulb, it is compatible with dimmable E27 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

• Living rooms with standard or lower ceiling heights
• Bedrooms where a low-profile ceiling light is preferred
• Hallways and entrance areas
• Dining rooms that suit antique brass finishes
• Classic and modern classic interiors
• Rooms where a hanging pendant would reduce headroom
• Indoor spaces that do not require a bathroom-rated fitting

• Flush ceiling format keeps the overall projection to 23 cm.
• Antique brass plated finish introduces a warm decorative accent.
• Clear ribbed glass adds texture while allowing the bulb to remain visible.
• Uses a replaceable E27 LED bulb, so the light source can be changed when required.
• Verified maximum of 10W LED provides clear guidance when choosing a bulb.
• Compatible with dimmable E27 bulbs and a suitable dimmer switch.
• 30 cm diameter gives the fitting a noticeable presence without a wide footprint.
• Class I construction requires an earth connection as part of the electrical installation.

• A practical option for rooms where pendant height would be restrictive.
• Combines decorative ribbed glass with an antique brass finish.
• Replaceable E27 lamp format allows choice of suitable LED bulb.
• Dimming compatibility provides additional lighting control when the correct bulb and dimmer are used.
• IP20 construction is suitable for normal dry indoor areas.

What bulb does the Endon Harborne 121209 use?

It uses one E27 LED bulb with a verified maximum wattage of 10W LED. The bulb is not included, so you can select an appropriate E27 LED lamp to suit the brightness and colour temperature you want.

Is this ceiling light dimmable?

It is compatible with dimmable E27 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

Is the Harborne suitable for a low ceiling?

Yes. Its flush design projects 23 cm from the ceiling, making it a practical alternative to a pendant in rooms where available headroom is limited.

Can this light be used in a bathroom?

The fitting is rated IP20, so it is intended for normal dry indoor areas. It should not be treated as a bathroom-rated fitting where a higher level of moisture protection is required.

Does the fitting need to be earthed?

Yes. The Harborne is a Class I fitting, which means an earth connection is required as part of the fixed electrical installation.