Lyon - Satin Brass Pendant

The Lyon pendant is made from steel and finished in satin brass plate. Its shade is formed from several layered, open metal sections, creating a distinctive geometric silhouette without enclosing the bulb behind glass or a diffuser. The satin finish provides a warmer and softer appearance than highly polished brass.

A black suspension flex provides contrast against the brass finish. The exposed central bulb remains clearly visible through the open structure, making the choice of lamp part of the finished appearance of the fitting.

This pendant uses one E27 LED bulb with a verified maximum of 10W LED. The bulb is not included, so you can select the brightness and colour temperature that best suit the intended room. The open shade allows light to spread through and around the layered frame rather than passing through an enclosed diffuser.

The suspension is height-adjustable during installation, with a minimum drop of 33 cm and a maximum drop of 143 cm. This flexibility is useful when positioning the pendant over a dining table, kitchen island or open floor area.

Compatible with dimmable E27 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

• Dining rooms and dining tables
• Kitchen islands and breakfast areas
• Living rooms requiring a decorative central pendant
• Hallways and entrance spaces with suitable ceiling height
• Bedrooms with contemporary decorative schemes
• Modern interiors using warm brass accents
• Spaces where an exposed bulb design suits the decor

• Layered geometric shade creates a distinctive decorative focal point.
• Satin brass plated finish adds a warm metallic accent without a highly polished appearance.
• 45 cm diameter gives the pendant a noticeable presence while retaining an open visual structure.
• Adjustable 33 cm to 143 cm drop provides flexibility for different ceiling heights and placements.
• Single E27 lampholder makes replacement LED bulbs easy to source.
• Maximum 10W LED lamp rating provides a clearly defined LED specification.
• Open shade construction allows light to spread beyond the frame.
• Compatible with dimmable E27 bulbs and a suitable dimmer switch.
• IP20 rating makes the fitting suitable for normal dry indoor areas.

• Combines a contemporary geometric profile with a warm satin brass finish.
• Adjustable suspension makes it suitable for both higher and lower installation positions.
• Replaceable E27 lamp means the light output and colour temperature can be chosen separately.
• Open construction keeps the fitting visually lighter than a fully enclosed pendant of similar diameter.
• The 45 cm diameter works well as a decorative focal point above tables, islands and open room areas.

What bulb does the Endon Lyon 121072 use?

It uses one E27 LED bulb with a maximum rating of 10W LED. The bulb is purchased separately, allowing you to choose a suitable brightness and colour temperature for the room.

Is the bulb included?

No. The Lyon pendant does not include a bulb. One E27 LED bulb is required, with a maximum rating of 10W LED.

Can the height of the pendant be adjusted?

Yes. The drop can be set during installation from a minimum of 33 cm to a maximum of 143 cm. This gives useful flexibility when positioning the fitting above a table, island or open floor area.

Can the Lyon pendant be dimmed?

It is compatible with dimmable E27 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

Is this pendant suitable for a bathroom?

The fitting is rated IP20, so it is intended for normal dry indoor locations. It should not be selected for bathroom zones or other areas that require a higher level of moisture protection.