Lyon - Matt Black & Satin Brass Floor Lamp

The Lyon uses a clean, geometric design built around its multi-tiered metal shade. A matt black exterior gives the lamp a restrained contemporary appearance, while the satin brass painted inner surface adds a warmer contrasting detail that becomes particularly noticeable around the light source. The fitting is constructed from steel and has a tall, slim stem supporting the layered shade above a circular base. At 150 cm high and 39.5 cm in diameter, it has enough visual presence to work as a decorative floor light without requiring a separate side table or mounting point.

This floor lamp uses one E27 LED bulb with a verified maximum of 10W LED. The bulb is not included, allowing the light output and colour temperature to be selected separately to suit the room. Its layered shade is designed to direct light downwards, while the satin brass painted inner surface provides a contrasting reflective area around the lamp.

Operation is through an in-line foot switch positioned on the 2 metre black power cable, making the lamp convenient to switch on and off without reaching beneath the shade. The Lyon provides on/off control only and is not dimmable. As a plug-in Class II fitting, it does not require permanent wiring. The IP20 rating makes it suitable for dry indoor rooms rather than bathrooms or outdoor areas.

• Living rooms requiring an additional freestanding light source
• Reading corners and seating areas
• Bedrooms with contemporary black or brass details
• Home offices and studies
• Modern and mid-century inspired interiors
• Spaces where a decorative layered shade can become part of the room design
• Dry indoor areas where an IP20 floor lamp is appropriate

• Layered shade creates a distinctive geometric focal point.
• Matt black finish is contrasted by a satin brass painted shade interior.
• Single E27 lampholder is compatible with energy-efficient LED lamps.
• 10W LED maximum provides a clear product-specific lamp limit.
• In-line foot switch allows convenient on/off operation from floor level.
• 2 metre cable provides useful flexibility when positioning the lamp near a socket.
• 150 cm height gives useful freestanding illumination beside seating or furniture.
• Class II double-insulated construction does not require an earth connection.

• Combines practical floor lighting with a sculptural multi-tiered shade.
• Black and satin brass detailing suits a wide range of contemporary interiors.
• Uses a replaceable E27 LED bulb, so the preferred brightness and colour temperature can be selected separately.
• Foot-operated switching makes the lamp convenient for regular use beside sofas, chairs or beds.
• Plug-in operation avoids the need for permanent ceiling or wall installation.

What bulb does the Endon Lyon 121069 use?

It uses one E27 LED bulb with a maximum rated power of 10W LED per bulb. The bulb is purchased separately, so you can choose an appropriate light output and colour temperature for your room.

Is the Lyon floor lamp dimmable?

No. This floor lamp provides on/off operation through its in-line foot switch and is not designed with a dimming function.

How large is the Endon Lyon floor lamp?

The lamp measures 150 cm high and 39.5 cm in diameter. Its tall proportions make it suitable beside sofas, armchairs and other furniture where a freestanding source of additional light is useful.

Does this floor lamp need to be wired by an electrician?

No. The Lyon is a plug-in floor lamp with a 2 metre power cable and in-line foot switch, so it does not require permanent electrical installation.

Can the Endon Lyon floor lamp be used in a bathroom or outdoors?

No. Its IP20 rating is intended for dry indoor locations. It should not be used in bathrooms, outdoor areas or other locations where protection from moisture is required.