Ridgeton - Antique Brass Flush with Ribbed Glass & Diffuser IP44

The Ridgeton has a rounded flush profile finished in antique brass, giving the fitting a warm, decorative appearance that works particularly well with classic and modern classic interiors. Clear ribbed glass panels surround the fitting, adding texture and allowing the light sources to contribute to the overall appearance.

A frosted glass diffuser is positioned beneath the lamps. This helps soften the direct view of the bulbs from below while complementing the patterned clear glass around the sides. The fitting is constructed from steel and glass and measures 34 cm in diameter.

Two E14 lamp holders provide separate points of light within the fitting. Each accepts an LED bulb up to a verified maximum of 7W, and the bulbs are purchased separately. Golf ball-shaped E14 LED bulbs are a suitable choice for this fitting.

The clear ribbed side panels allow light to pass through the patterned glass, while the frosted lower diffuser helps reduce direct glare when the fitting is viewed from underneath. Because the bulbs are replaceable, you can choose a suitable colour temperature and lumen output for the room rather than being tied to an integrated LED module.

The Ridgeton is compatible with dimmable E14 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

• Bathrooms where an IP44-rated decorative ceiling light is required
• Ensuites and cloakrooms
• Hallways and entrance areas
• Kitchens and utility rooms
• Rooms with lower ceilings where a pendant would project too far
• Classic and modern classic interiors
• Spaces with antique brass fixtures or warm metallic accents

• IP44 rated for suitable bathroom applications.
• Flush ceiling design projects only 16.5 cm into the room.
• Two E14 lamp holders distribute light from two separate points.
• Replaceable LED bulbs let you select the brightness and colour temperature to suit your space.
• Clear ribbed glass adds visible texture and decorative detail.
• Frosted lower glass helps soften the direct view of the bulbs.
• Antique brass finish suits interiors using warm metallic details.
• Compatible with dimmable E14 bulbs and a suitable dimmer switch.

• Combines bathroom-suitable IP44 protection with a decorative glass design.
• The 34 cm diameter gives the fitting visual presence while retaining a compact flush profile.
• Replaceable bulbs make it easier to tailor the light output and replace a lamp when required.
• Ribbed and frosted glass provide two different textures within one coordinated design.
• Suitable for both bathroom and general indoor applications where its IP rating and design are appropriate.

Can the Endon Ridgeton 120847 be used in a bathroom?

Yes. The fitting has an IP44 rating and is designed for suitable bathroom applications. Its exact position should comply with the applicable bathroom zones and local electrical wiring regulations, so installation should be assessed accordingly.

What bulbs does this ceiling light use?

The Ridgeton uses two E14 LED bulbs, with a maximum verified rating of 7W LED per bulb. Golf ball-shaped E14 LED bulbs are a suitable choice. The bulbs are not supplied with the fitting.

Is the Endon Ridgeton dimmable?

Yes. It is compatible with dimmable E14 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

Is this suitable for a room with a lower ceiling?

The flush design is well suited to locations where a hanging pendant would project too far into the room. It measures 16.5 cm high and 34 cm in diameter, giving it a relatively shallow ceiling profile.

Does the Ridgeton have integrated LEDs?

No. It uses two replaceable E14 LED bulbs rather than an integrated LED module. This means the bulbs can be replaced and their brightness and colour temperature selected to suit the room.