Stamford - Brushed Aged Brass 3 Light Centre Fitting with Clear Ribbed Glass

The Stamford combines a warm brushed aged brass finish with clear ribbed glass shades. Three arms extend from the central ceiling fitting, positioning the glass shades around the 55 cm diameter frame for a balanced, open appearance.

Vertical ribbing adds visible texture to the clear glass and gently breaks up the appearance of the light source when illuminated. Plated metal trim around the shades coordinates with the main finish. The combination of brass tones, clear glass and simple curved lines gives the fitting a distinct mid-century influence that can also work comfortably in contemporary interiors.

Three separate G9 lampholders distribute light from several points around the fitting rather than relying on a single central bulb. The clear ribbed glass allows light to pass through while the textured surface helps soften and visually diffuse the output.

The Stamford is designed for replaceable G9 LED bulbs, with Endon specifying a maximum of 5W LED per bulb. Bulbs are not included, allowing the colour temperature and brightness to be selected separately.

Compatible with dimmable G9 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

With a fixed height of approximately 23.5 cm, the semi-flush format keeps the fitting relatively close to the ceiling and makes it particularly useful where a conventional pendant would reduce headroom.

• Living rooms requiring a decorative low ceiling fitting
• Dining rooms where a long pendant is not practical
• Bedrooms with standard or lower ceiling heights
• Hallways and entrance areas with sufficient width for a 55 cm fitting
• Mid-century inspired interiors
• Contemporary rooms using warm brass finishes and clear glass
• Indoor areas where an IP20 fitting is appropriate

• Three-light design provides illumination from multiple points around the fitting.
• Semi-flush construction is particularly practical where ceiling height limits pendant use.
• Clear ribbed glass adds texture while allowing the light sources to remain effective.
• Brushed aged brass finish introduces a warm metallic detail to the room.
• Replaceable G9 LED bulbs make it possible to choose a preferred light colour and output.
• Dimming compatibility provides adjustable brightness when suitable dimmable bulbs and a compatible dimmer are installed.
• Class 1 construction is designed for connection to earth as part of a mains-wired installation.
• The 55 cm diameter gives the fitting a noticeable decorative presence without the drop of a chandelier or pendant.

• Combines the visual presence of a three-arm decorative ceiling light with a low 23.5 cm profile.
• Coordinates clear textured glass with a brushed aged brass finish for a distinctive mid-century influenced look.
• Uses readily replaceable G9 LED bulbs rather than a permanently integrated light source.
• Suitable for customers who want optional dimming without an integrated dimming system.
• Part of Endon's Stamford range, with coordinating fittings available for a consistent lighting scheme.

Are the bulbs included with the Endon Stamford 120634?

No. Three G9 bulbs must be purchased separately. Endon specifies G9 LED lamps with a maximum rating of 5W LED per bulb, so you can select a suitable colour temperature and brightness for the room.

Is the Stamford 120634 dimmable?

Yes. It is compatible with dimmable G9 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

Is this ceiling light suitable for a low ceiling?

Yes. Endon specifically describes the Stamford as suitable for low ceilings. Its semi-flush design is approximately 23.5 cm high, providing a decorative three-light arrangement without the longer drop associated with a suspended pendant.

Can the Endon Stamford 120634 be used in a bathroom?

The fitting is rated IP20, so it is intended for suitable dry indoor locations rather than areas requiring increased protection from moisture. For bathroom installation, choose a fitting with the IP rating required for the intended bathroom zone.

How large is the Stamford three light ceiling fitting?

It measures 550 mm in diameter and 235 mm high, which is approximately 55 cm wide and 23.5 cm high. Check the available ceiling area as well as the room proportions before installation.