Ridgeton - Antique Brass Flush with Frosted Ribbed Glass

The Ridgeton combines an antique brass-plated finish with ribbed glass for a decorative, classic appearance. The cylindrical glass shade surrounds the central lamp position, with the ribbed surface adding texture to the fitting and helping soften the appearance of the light source. Steel and glass construction is confirmed for this design.

Its close-to-ceiling form makes the fitting visually substantial without the drop of a pendant. The warm brass tone and textured glass suit both traditional rooms and interiors that use classic detailing alongside simpler contemporary furnishings.

This flush ceiling light uses one E27 LED bulb with a verified maximum of 10W LED. The bulb is not included, so you can select an appropriate E27 lamp according to the brightness and colour temperature required for the room.

The ribbed glass surrounds the single light source and helps diffuse the light rather than leaving the lamp completely exposed. With a projection of 21.5 cm, the fitting is particularly practical where ceiling height is limited.

Compatible with dimmable E27 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

• Living rooms with traditional or modern classic decor
• Bedrooms where a low-profile ceiling fitting is preferred
• Dining areas with limited ceiling height
• Hallways and entrance areas
• Studies and home offices
• Rooms using antique brass accents
• Indoor spaces where a decorative flush fitting is more practical than a pendant

• Flush ceiling design helps preserve headroom in rooms with lower ceilings.
• Antique brass plated finish gives the fitting a warm, classic appearance.
• Ribbed glass adds texture and helps soften the appearance of the illuminated bulb.
• Uses one replaceable E27 LED bulb, allowing the light colour and output to be selected separately.
• Verified 10W LED maximum provides clear guidance when choosing a replacement lamp.
• Dimming compatibility allows adjustable light levels when used with a suitable dimmable E27 bulb and dimmer switch.
• 31 cm diameter provides a decorative presence without the width of a large chandelier or multi-light fitting.
• 21.5 cm projection keeps the fitting relatively close to the ceiling.

• A practical alternative to a pendant where ceiling height is restricted.
• Combines a classic antique brass finish with textured glass rather than a plain open bulb design.
• Replaceable E27 lamp holder gives more flexibility than a fixed integrated light source.
• Suitable for LED lamps with a clearly specified 10W LED maximum.
• Dimming compatibility provides additional control over room lighting when suitable components are used.

What bulb does the Endon Ridgeton 119457 use?

It uses one E27 LED bulb with a maximum verified wattage of 10W LED per bulb. The bulb is not included, so you can choose the light output and colour temperature to suit your room.

Is the Endon Ridgeton 119457 dimmable?

Yes. It is compatible with dimmable E27 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

Is this ceiling light suitable for low ceilings?

Yes. Its flush design and 21.5 cm projection make it a practical option where a hanging pendant would reduce headroom. The fitting measures 31 cm in diameter.

Can the Ridgeton 119457 be used in a bathroom?

The current product information used for this version identifies the fitting as IP20. On that basis, it should be treated as a general indoor ceiling light rather than specified as a bathroom fitting.