Witham - Unglazed Ceramic Wall Lamp

The Witham has a softly curved ceramic body with subtle vertical ribbing across the front. Its unglazed white finish gives the surface a matt, understated appearance rather than the reflective look of glazed ceramic. Openings at the top and bottom allow light to escape in both directions, creating visible illumination on the wall while keeping the bulb largely concealed from normal viewing angles.

The ceramic surface is suitable for painting, which gives additional flexibility when coordinating the fitting with an interior colour scheme.

This wall light uses one E14 LED bulb with a verified maximum of 6W LED. The bulb is positioned inside the ceramic body, with the open upper and lower edges directing light onto the wall above and below the fitting. This makes the Witham particularly useful for decorative and supplementary ambient lighting rather than concentrated task lighting.

The bulb is not included, so the colour temperature and brightness can be selected separately. LED bulbs are compatible.

Compatible with dimmable E14 bulbs, when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

The fitting is Class II double insulated and rated IP20 for dry indoor locations.

• Living rooms requiring decorative wall lighting
• Dining rooms and dining areas
• Bedrooms and bedside wall lighting
• Hallways, entrances and stairways
• Contemporary and minimalist interiors
• Rooms where a paintable wall fitting is useful
• Dry indoor areas where an IP20 fitting is appropriate

• Unglazed ceramic construction provides a simple matt white appearance.
• Paintable surface allows the fitting to be coordinated with the surrounding wall colour.
• Open top and bottom produce an upward and downward wash of light.
• Single replaceable E14 bulb allows the light colour and output to be chosen separately.
• Compatible with LED bulbs up to 6W LED.
• Dimming compatibility provides adjustable light levels when suitable components are used.
• Compact 9.5 cm projection helps keep the fitting relatively close to the wall.
• Class II construction means the fitting is double insulated.

• Combines decorative wall lighting with a simple contemporary ceramic design.
• Paintable ceramic offers more flexibility than a permanently coloured finish.
• Upward and downward illumination can help add depth and visual interest to a wall.
• Uses a readily available replaceable E14 LED bulb rather than an integrated light source.
• Its 27 cm width makes it suitable for creating a noticeable lighting feature without a deep projection into the room.

What bulb does the Endon Witham 106616 use?

It uses one E14 LED bulb with a maximum verified wattage of 6W LED per bulb. The bulb is not supplied, so you can select the brightness and colour temperature that best suit the room.

Is the bulb included?

No. The E14 LED bulb needs to be purchased separately. This gives you the flexibility to choose an appropriate colour temperature and light output for your interior.

Can this wall light be dimmed?

Yes. It is compatible with dimmable E14 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

Can the ceramic wall light be painted?

Yes. The unglazed ceramic surface is suitable for painting, so the fitting can be coordinated with the surrounding wall colour or finished in a contrasting colour to create a more noticeable feature.

Is the Witham suitable for a bathroom or outdoor use?

The fitting is rated IP20 and is intended for dry indoor locations. It should not be treated as a bathroom or outdoor fitting where protection against moisture or water is required.