Ridgeton - Antique Brass 3 Light Pendant with Ribbed Glass

The Ridgeton pairs an antique brass plated finish with clear ribbed glass panels for a decorative, classic appearance. Its three light sources are arranged around the centre of the fitting and enclosed by the glass-sided structure, creating a balanced lantern-style profile when viewed from different angles.

The fitting is constructed from steel and glass. Ribbing across the clear glass adds visible texture while retaining a view of the lamps inside, making suitable E14 filament-style LED bulbs a natural companion to the design.

Three E14 lampholders provide light from separate points around the fitting. Endon specifies 3 x 6W LED E14 bulbs, which are not included. Candle-style E14 LED lamps are appropriate for this design, with filament versions particularly suited to the visible-bulb appearance.

The pendant is compatible with dimmable E14 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

A 1.5 metre chain and clear cable provide an adjustable overall height of approximately 40 cm to 176 cm. This allows the drop to be set during installation to suit the room, whether positioned above a dining table or used as a decorative central pendant in a hallway or living area.

• Dining rooms requiring a decorative central pendant
• Hallways and entrance areas with suitable ceiling height
• Living rooms with classic or modern classic interiors
• Rooms where antique brass finishes complement existing details
• Spaces where clear decorative glass is preferred over an opaque shade
• Installations that benefit from an adjustable chain suspension

• Three-light design distributes illumination from multiple points around the fitting.
• Clear ribbed glass panels add texture while leaving the lamps visible.
• Antique brass plated finish gives the pendant a warm, classic appearance.
• Height adjustable from approximately 40 cm to 176 cm during installation.
• Uses replaceable E14 LED bulbs, so the lamps can be changed when required.
• Compatible with dimmable E14 bulbs and a suitable dimmer switch.
• 45 cm diameter provides a substantial decorative presence without an unusually wide footprint.
• Steel and glass construction combines a structured frame with decorative transparent panels.

• Combines a classic lantern-inspired form with textured clear glass and an antique brass finish.
• Adjustable suspension provides flexibility when setting the pendant at a suitable height.
• Three replaceable E14 lamps make future bulb replacement straightforward.
• Dimming compatibility gives greater control over light levels when suitable dimmable bulbs and controls are installed.
• Suitable for several indoor applications including dining rooms, hallways and living spaces.

Are the bulbs included with the Endon Ridgeton 106282?

No. The pendant requires three E14 LED bulbs, which need to be purchased separately. Endon specifies a maximum of 6W LED per bulb and recommends pairing the design with E14 LED filament lamps.

Can the Ridgeton pendant be dimmed?

Yes. It is compatible with dimmable E14 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

Can the hanging height be adjusted?

Yes. The chain suspension is height adjustable during installation, with an overall drop from approximately 40 cm to 176 cm. This provides flexibility when positioning the fitting over a dining table or as a central room light.

Is the Endon Ridgeton suitable for a bathroom?

The fitting is rated IP20, so it is intended for dry indoor locations rather than areas requiring enhanced protection from moisture. It is better suited to spaces such as dining rooms, hallways and living rooms.

How large is the Ridgeton 3 light pendant?

The fitting measures 45 cm in diameter and has an adjustable overall height of approximately 40 cm to 176 cm. Its dimensions make it a noticeable decorative feature while allowing the suspension height to be tailored during installation.