Bellis II - Antique Brass 3 Light Semi Flush with Crystal

The Bellis II is finished in antique brass and constructed from mild steel and glass. Three curved decorative sections extend from the central fitting, each forming a flower-head style sphere with intricate loops and clear glass buttons. The combination of the warm antique brass finish and transparent glass gives the light a traditional, decorative character without requiring a hanging chandelier. Its broad 54 cm form sits relatively close to the ceiling, so the detailing remains visible while the fitting projects only 17.5 cm into the room.

Three G9 lamp holders position the light sources around the fitting rather than concentrating illumination at one central point. The clear glass detailing leaves the bulbs visually open and can reflect light through the surrounding decorative elements.

Bulbs are not included. The fitting is compatible with G9 LED bulbs. It is also compatible with dimmable G9 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

The semi-flush construction keeps the overall height to 17.5 cm, making the Bellis II useful where a longer pendant suspension would reduce headroom. With an IP20 rating, it is intended for normal dry indoor locations rather than bathrooms or outdoor areas.

• Living rooms needing a decorative central ceiling light
• Dining rooms with classic or traditional detailing
• Bedrooms where a long pendant would hang too low
• Kitchens outside areas requiring a higher IP rating
• Hallways and landings with limited ceiling height
• Classic, period-inspired and decorative interiors
• Rooms using warm antique brass accents

• Three-light arrangement distributes illumination from several points across the fitting.
• Semi-flush construction reduces the vertical drop compared with a suspended pendant.
• Antique brass finish introduces a warm, classic metallic tone.
• Clear glass buttons add visible decorative detail and interact with the light from the G9 bulbs.
• Compatible with modern G9 LED bulbs.
• Dimming is possible with suitable dimmable G9 bulbs and a compatible dimmer switch.
• 54 cm width gives the fitting a substantial decorative presence without a chandelier-style suspension.
• Part of the wider Searchlight Bellis II collection for coordinated lighting schemes.

• Combines ornate decorative styling with a relatively shallow 17.5 cm overall height.
• Provides three separate G9 light sources in one central ceiling fitting.
• Works well where antique brass and clear glass details complement the surrounding interior.
• Offers LED compatibility while retaining replaceable bulbs.
• Suitable for a range of dry indoor rooms including bedrooms, living rooms and dining areas.

Are the bulbs included?

No. The Bellis II 6573-3AB requires three G9 bulbs, which must be purchased separately. This allows you to select the light output and colour temperature that best suit the room.

Can I use LED bulbs with this ceiling light?

Yes. The fitting is compatible with G9 LED bulbs. Three replaceable lamp holders are provided, so the bulbs can be changed independently when required.

Is the Searchlight Bellis II 6573-3AB dimmable?

It is compatible with dimmable G9 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

Is this fitting suitable for rooms with lower ceilings?

Yes. Its semi-flush construction keeps the overall height to 17.5 cm, so it takes up considerably less vertical space than a suspended pendant or chandelier while retaining a decorative three-light design.

Can this light be used in a bathroom?

The fitting is rated IP20, so it is intended for normal dry indoor locations. It should not be selected for bathroom zones or other areas where a higher level of protection against moisture is required.