The Architectural Lighting Tuam 65852 is a compact IP54 LED flush light designed for both wall and ceiling mounting. Its low-profile, 30 cm diameter form combines a dark grey surround with a white diffuser, creating a simple contemporary appearance for indoor and outdoor applications. An integrated 18W LED produces 1320 lumens at a warm white 3000K colour temperature, so there are no separate bulbs to buy or replace during installation. Constructed from PC and ABS plastics, the Tuam is weatherproof and is specifically described as suitable for coastal locations. At only 4.4 cm high, it is particularly useful where a neat fitting with minimal projection is preferred.
The Tuam has a clean circular profile measuring 30 cm in diameter and just 4.4 cm high. A dark grey outer section frames the broad white diffuser, producing a simple architectural look that works well with modern interiors and exterior spaces.
Both the body and diffuser use plastic materials, with PC and ABS construction specified for the fitting. Its shallow form keeps the light close to the mounting surface, making it a discreet alternative to more projecting wall or ceiling fittings.
An integrated 18W LED light source delivers 1320 lumens with a 3000K warm white colour temperature. The broad white diffuser covers the LED source and spreads the illumination across the face of the fitting rather than exposing an individual lamp.
Because the LED is built in, a separate bulb is not required. The IP54 rating provides protection against limited dust ingress and splashing water. The fitting is suitable for both wall and ceiling applications and is also described as weatherproof and suitable for coastal locations.
- Outdoor walls and covered exterior ceiling areas where an IP54 fitting is appropriate
- Coastal properties requiring a fitting specifically described as suitable for coastal locations
- Bathrooms or utility areas where the installation position is suitable for an IP54 light
- Hallways and circulation areas needing a low-profile flush fitting
- Modern interiors with grey, white or neutral finishes
- Locations where minimal projection from the wall or ceiling is useful
- Integrated 18W LED means no separate bulb is required
- 1320 lumen output provides a useful level of general illumination
- 3000K colour temperature produces warm white light
- IP54 construction is suitable for locations requiring protection from splashing water
- Suitable for both wall and ceiling mounting for greater placement flexibility
- Only 4.4 cm high, keeping projection from the mounting surface to a minimum
- PC and ABS plastic construction is specified for this weatherproof design
- Suitable for coastal locations according to the available product information
- Class II double insulated construction
- Combines an integrated LED source with a compact 30 cm circular format
- Can be installed on either a wall or ceiling to suit different applications
- IP54 protection makes it more versatile than a standard dry-area ceiling light
- Its shallow 4.4 cm profile suits spaces where a discreet fitting is preferred
- Warm white 3000K lighting is suitable for both practical and general ambient illumination
- Dark grey and white finishes give the fitting a simple contemporary appearance
| Brand | Architectural Lighting |
|---|---|
| Collection | Tuam |
| Product Code | 65852 |
| Product Type | LED flush wall/ceiling light |
| Finish | Dark grey |
| Body Material | PC / ABS plastic |
| Shade / Diffuser Material | Acrylic/plastic |
| Shade / Diffuser Colour | White |
| Number of Lights | 1 |
| Integrated LED | Yes |
| Maximum Wattage | 18W integrated LED |
| Lumens | 1320 lm |
| Colour Temperature | 3000K warm white |
| Bulbs Included | Integrated LED included |
| Dimmable | Not confirmed |
| IP Rating | IP54 |
| Class of Insulation | Class II, double insulated |
| Height | 44 mm |
| Diameter | 300 mm |
| Mounting | Wall or ceiling |
| Switch Type | Mains operated |
| Coastal Suitability | Suitable for coastal locations |
Does the Architectural Lighting Tuam 65852 need a bulb?
No. The Tuam has a built-in 18W LED light source, so there is no separate replaceable bulb to purchase. The integrated LED produces 1320 lumens with a warm white 3000K colour temperature.
Can the Tuam 65852 be fitted on a wall as well as a ceiling?
Yes. This fitting is designed for both wall and ceiling applications. Its circular design and shallow 4.4 cm profile allow it to sit close to whichever mounting surface is used.
Is this light suitable for outdoor use?
The Tuam has an IP54 rating and is described as a weatherproof fitting suitable for coastal locations. Its suitability for a particular outdoor position should still be checked against the exposure and installation requirements of that location.
What colour light does the Tuam produce?
The integrated LED has a 3000K colour temperature, producing warm white light. Its white diffuser covers the LED source and distributes the illumination across the broad circular face of the fitting.
Product range name and SKU: Tuam - 65852
This product is supplied by Architectural Lighting
| Product Info | |
| Brand | Architectural Lighting |
| Product Code | 65852 |
| Range Name | Tuam |
| Dimensions | |
| Height (cm) | 4.4 cm |
| Diameter (cm) | 30 cm |
| Bulb | |
| Energy Efficiency Class | F |
| Bulb Included | Yes |
| Number of Lights | 1 |
| Lamp Holder Type | Integrated LED |
| Type of Included Bulb | LED (build-in) |
| Colour Temperature (Kelvin) | 3000 K |
| Lumens Output | 1320 lm |
| Maximum Wattage (W) | LED 18W |
| Product Finish | |
| Shade / Diffuser Material | Acrylic / Plastic |
| Shade / Diffuser Colour | White |
| Frame / Base Material | Acrylic / Plastic |
| Frame / Base Colour | Grey / Silver |
| Features | |
| IP Rating | IP54 |
| Class of Insulation | Class 2 (Double Insulated) |
| Switch Type | Mains Operated |
How bright is a light bulb?
Because the Lumen output from different manufacturers will vary. Here's a quick and easy guide to approximate total Lumen output.
Lumens |
Watts |
| 2600 Lumens (lm) | 150W |
| 1600 Lumens (lm) | 100W |
| 1100 Lumens (lm) | 75W |
| 800 Lumens (lm) | 60W |
| 450 Lumens (lm) | 40W |
Understanding LED colour temperature and the Kelvin scale
Colour temperature 2000K to 3000K, the light produced is often referred to as a "warm white", "soft white", occasionally called a "candle white". It ranges from orange-ish to yellow-ish white in appearance. This kind of light is attractive, enjoyable, comfortable and relaxing.
Colour temperature 3100K to 4500K, the light produced is often referred to as a "neutral white", "bright white" or "natural white". Light sources within this range will emit a more neutral white light and may even have a slightly blue tint. This kind of light is bright, vibrant and clean appearing.

Colour temperature 4600K and above, the light produced is often referred to as a "cool white", "pure white" or "day white". Light sources in this range will have a blue-ish white tint to them. The higher the number, the more blueish it will appear. This kind of light will appear crisp, invigorating and energetic.
Please refer to full guide described in the main LED bulbs description
- Model: Tuam - 65852
- SKU: Architectural Lighting-65852