Knightsbridge - Antique Brass 2 Light Wall Lamp with White Shade

The Knightsbridge wall lamp features a circular wall plate with two angular metal arms finished in antique brass. A single white fabric half shade sits across the front of the fitting, concealing the lamps while leaving the decorative brass structure visible below. The shade is described as fabric and organza, giving the fitting a softer appearance than an open wall light. At 26 cm high and 34 cm wide, it has enough presence for use as a decorative wall feature without taking up excessive space.

Two E14 lampholders position the light across separate points behind the white fabric shade. This arrangement helps spread illumination across the width of the fitting, while the shade softens the direct view of the bulbs. The bulbs are not included, so two suitable E14 LED bulbs are required.

The verified maximum is 7W LED per bulb. As a mains-wired wall fitting with replaceable E14 bulbs, it is compatible with dimmable E14 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

With an IP20 rating, the Knightsbridge 20895 is intended for dry indoor areas rather than bathrooms, outdoor locations or other places exposed to moisture.

• Living rooms requiring soft supplementary wall lighting
• Bedrooms where a shaded decorative wall light suits the interior
• Dining rooms with classic or modern classic furnishings
• Hallways and landings in dry indoor locations
• Interiors featuring antique brass details or warm metallic finishes
• Rooms where a twin light wall fitting is preferred to a single lamp

• Two E14 light sources distribute illumination from two separate points.
• White fabric and organza shade help soften the appearance of the bulbs.
• Antique brass finish provides a warm decorative accent for the wall.
• 18.5 cm projection keeps the fitting relatively close to the wall.
• Compatible with LED bulbs up to the verified 7W maximum per bulb.
• Dimming is possible with suitable dimmable E14 bulbs and a compatible dimmer switch.
• IP20 construction is suitable for normal dry indoor rooms.
• Matching Knightsbridge fittings can be used to coordinate lighting across an interior.

• Combines a traditional antique brass finish with a simple white fabric shade.
• Twin lampholders provide broader light distribution than a comparable single-light wall fitting.
• Works well as supplementary lighting in bedrooms, living spaces and dining areas.
• Replaceable E14 bulbs allow the lamp output and colour temperature to be selected to suit the room.
• Compact 26 cm by 34 cm proportions suit a range of domestic wall locations.

Are the bulbs included with the Knightsbridge 20895?

No. The fitting requires two E14 bulbs, which must be purchased separately. The verified maximum is 7W LED per bulb.

Can this wall light be dimmed?

Yes. It is compatible with dimmable E14 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

Is the Knightsbridge 20895 suitable for a bathroom?

No. Its IP20 rating is intended for dry indoor areas and does not provide the moisture protection normally required for bathroom zones or outdoor use.

How far does the light project from the wall?

The fitting has a depth of 18.5 cm. Its overall dimensions are 26 cm high and 34 cm wide, making it suitable where a decorative twin wall light is required without a particularly deep projection.

What rooms suit this wall light?

The antique brass finish and white fabric shade suit bedrooms, living rooms, dining rooms, hallways and similar dry indoor areas. It works particularly well where soft supplementary lighting and classic decorative detailing are wanted.